Products

Vedio Transmitter

Product Name：2ch vedio optical transmitter

P/N：

<< GoBack>>

Product Description：

Key Features：

· Complete SMD components, 18 inches duralumin chassis, and standalone case.

· Support hot plug and play, switch power supply.

· Optical interface: FC,ST, SC (optional).

· Without EMI, RFI and ground loop.

· 8BIT and 10BIT quantification level is optional.

· Abundant signal interface, such as video, data, audio, telephone, Ethernet,
binary input/output and talkback.

· Perfect signal indicator for optical, video, data, audio, telephone, Ethernet,
binary input/output and power supply.

· Excellent data anti-thunder solution.

· 1310nm and 1550nm optional and max optical link loss is 30dB.

· Standalone and module two types.

· Standalone video multiplexer (1U chassis and standalone multiplexer),
additional chassis is unnecessary.

· Module type equipped with 18 slots chassis.

Application:

· City traffic monitoring system.

· Police and safe city monitoring system.

· High way security protection and toll station system.

· Building and campus monitoring system.

· Industrial monitoring(airport, chemical plant, steel, oil, railway,
irrigation works, mine and so on).

· Military monitoring(storage, frontier defense, guard, national defense and so on).

· Electronic power oil field, TV station program broadcasting system.

· Gymnasium(live video and audio transmission).

Product information:

Opitcal:

Opitcal:

Output/Input Wavelength	1310nm&1470nm~1610nm
utput Power	-8~3dBm
Optic fiber	50/125u multimode ， 62.5/125u multimode ， 9/125u single mode
Rx sensitivity	-30dBm
Optical interface	FC 、 ST 、 SC(optional)

Video:

Number of Channels	1
Input/output impedance	BNC 75Ω (unbalance)
Standard video input/output voltage	2.0Vp-p
Video voltage range	0.6~2.0Vp-p
Differential Gain	< ±1%
Differential Phase	< ±1
S/N ratio	>60dB(weighting)(8 bit) >70dB(weighting)(10 bit)
Connector	BNC

Audio ：

Audio Input/output Impedance	600ohm(unbalance)
Max input/output voltage	2.0Vp-p
Frequency Response	10~20kHz
Total Harmonic Distortion	<0.05%
S/N ratio	>95dB(weighting)
Connector	Standard terminal lead

Data:

Data protocol	RS232 、 RS422 、 RS485 、 Manchester ， BIPHASE data
Data rate	0~300kbps
Error rate	10e-9
Connector	Standard terminal lead

Ethernet:

Work mode	Full duplex/half duplex
Network speed	10/100Mbps(AUTO)
connection terminal	RJ45

Telephone:

Connector	Standard RJ11
Phonetic bandwidth	8KHz
Work mode	Point to point hot line, program controlling switch/extension mode
Distortion	<1%
S/N ratio	>95dB

Binary input/Output:

Connector	Terminal lead
Signal input	alarm, Binary input, support TTL 、 RS-232/422/485 or passive switch button
Signal output	Arbitrary alarm, Binary output, support TTL 、 RS-232/422/485 or relay output
Connector	Standard terminal lead

Environmental:

Work voltage	Chassis supply electricity(170V~240V AC auto-adaptation)
Work temperature	-35 ℃ ～ +70 ℃
Humidity	0~95%non-condensing

Mechanical:

Standalone Dimension(H*W*D) 110mm *104mm *28mm

Ordering information:

FR-V310 2V↑1D↓WT/R 2 ch forward video + 1 ch reverse data

Model Specification of Video Optical Tx/Rx:

◆Model FR-V300: FR-V300 series represent Video Optical Transmitter/Receiver

V310 represents Desk-Top one;V320 represents in card

◆V: Video Signals . The front Arabic numeral represents thde number of signal channel,

↑is forward,↓is reverse,↑↓ means bidirectional.

◆A: Audio Signals. The front Arabic number represents the number of signal channel.

◆D: Data signals. The front Arabic number represents the number of signal channel.

◆K: Binary input/Output Signals. The front Arabic number represents the number of signal channel.

◆E: Ethernet signals. The front Arabic number represents the number of signal channel.

◆C: Telephone signals

◆S: single mode 1310nm

◆U: single mode 1550nm

◆M: Multimode 1310nm

◆W: Wavelength Division Multiples(WDM) 1310NM/1550NM

◆T/R: T is transmitter,R is receiver

QQ咨询

电话咨询